|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 2.0 16v conversion » Post Reply
|
| J da Silva |
posted on 8th Jul 04 at 08:44 |
best off just getting the chunky shafts from cossvaux, saves fucking about. | |
| corsaandy |
posted on 8th Jul 04 at 00:47 |
well ive got m-tech hubs and shafts which come with the kit but no the actual kit ive also got loads of other parts to put on so it should be fun | |
| Siberia |
posted on 7th Jul 04 at 21:45 |
quote: XE or LET? | |
| corsa_16v |
posted on 7th Jul 04 at 21:43 |
kool good luck are u usin 1 of those pvd kits? once you have done it could you tell me how u got on | |
| corsaandy |
posted on 7th Jul 04 at 21:32 |
ok cheers im hoping for around that price i am doing the conversion in about a month but havent rung any companies yet | |
| corsa_16v |
posted on 7th Jul 04 at 20:21 |
norwitch union but u got to have a cat 1 alarm but it was only ruth and 2 yrs no claims | |
| corsa_16v |
posted on 7th Jul 04 at 20:17 |
y | |
| corsaandy |
posted on 7th Jul 04 at 20:13 |
who was that from corsa_16v | |
| corsa_16v |
posted on 7th Jul 04 at 20:07 |
already have best quote was 1500 ruthly | |
| big eck |
posted on 7th Jul 04 at 18:26 |
Before you do anything, ring around for insurance | |
| corsa_16v |
posted on 7th Jul 04 at 18:10 |
ive got a 1.2 8v bag of shit at the mo if i did the conversion could i fit a power steering rack out of another corsa and what pipe and pump would i use | |
| J100RSA |
posted on 7th Jul 04 at 17:49 |
quote: they do if u use mk2 cav 1600 22 spline inner cv joints ;) | |
| stuyw |
posted on 7th Jul 04 at 17:10 |
if on a budget then use astra GTE shafts n get corsa hubs machined to fit :) | |
| SportBoy |
posted on 7th Jul 04 at 17:04 |
they dont ... i think theres some cav 1.6 inner cvs fit on corsa shafts and cav diesel?? | |
| stuyw |
posted on 7th Jul 04 at 15:51 |
i cant see how corsa GSi shafts will fit a big block engine :look: | |
| Greasemonkey |
posted on 7th Jul 04 at 15:15 |
:lol: Lets hope not i threw a set of GSI shafts down the tip a few weeks back and am doing a conversion soon:thumbs: | |
| royvious |
posted on 7th Jul 04 at 15:05 |
I heard you can use the shafts out of the gsi because the gearbox c.v is a big one and the outer c.v. is a small one. It saves you changing the hubs. These shaftsc are only in the gsi and not the later sport model. The shafts you have got are very difficult to get hold of and it will save you some money. Just double check by having a look at yours. | |
| J da Silva |
posted on 6th Jul 04 at 21:40 |
do a search on 'c20let conversion' or 'c20XE conversion' | |
| corsa_16v |
posted on 6th Jul 04 at 21:17 |
im very tempted to do this conversion but im not sure what parts i need i.e drive shafts e.t.c i know PVD do a kit but i was wondering can i use gsi shafts and what over bits will i need to get thanks:thumbs: |