|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » How to stop exhaust rattling on bumper? » Post Reply
|
sassyminx |
posted on 3rd Jul 04 at 09:00 |
thanks greebo :wave: | |
greebo2 |
posted on 3rd Jul 04 at 08:36 |
sassy I think you can get a corrugated flexible metal pipe that can be bent to shape you'll have to cut out the curved section of existing pipe though then clamp on flexi pipe at each end | |
daryll |
posted on 2nd Jul 04 at 20:31 |
Thats unlucky. Sounds like the kind of job id never get round to :D | |
sassyminx |
posted on 2nd Jul 04 at 19:51 |
lucky u mate mines catchin on the rear axle, spare wheel AND back bumper :( | |
daryll |
posted on 2nd Jul 04 at 19:22 |
Ive sorted it much cheaper than that :D | |
greebo2 |
posted on 1st Jul 04 at 19:12 |
to save you reading all that crap I wrote, just go to halfurds and get some HEX403 exhaust mounts | |
greebo2 |
posted on 1st Jul 04 at 19:09 |
http://www.corsasport.co.uk/board/viewthread.php?tid=155499 | |
scott b |
posted on 1st Jul 04 at 19:00 |
get some old suspension rubbers and put them inside the exhauster rubbers this will stiffen the exhaust rubber | |
daryll |
posted on 1st Jul 04 at 18:38 |
Can I get them from halfords? | |
Drysdale |
posted on 1st Jul 04 at 16:05 |
i had this problem with my standard exhaust....could be rattling against your springs like mine. Otherwise use tight rubber mounts. They're cheap as chips :thumbs: | |
daryll |
posted on 1st Jul 04 at 12:35 |
How much would tighter rubbers be? | |
Rileysport |
posted on 1st Jul 04 at 11:48 |
what zorst is it? | |
combatvauxhall |
posted on 1st Jul 04 at 11:46 |
Yeah tighter rubbers, lots of cable ties, and bust turn your music up. Thats all iv done but it still bangs like a wh*re against the bumper.:lol: | |
ed |
posted on 1st Jul 04 at 10:37 |
Get tighter rubbers on the exhaust. | |
daryll |
posted on 1st Jul 04 at 10:17 |
Thats a good point actually as it is lowered. | |
Mark Petty |
posted on 1st Jul 04 at 10:16 |
I use ford focus exhaust rubber mounts. I also have heavy duty cabel ties which also helps | |
L330wnz |
posted on 1st Jul 04 at 10:14 |
I think its adjustable and it could be knocking on the rear axle rather than the bumper :thumbs: | |
daryll |
posted on 1st Jul 04 at 10:13 |
At the moment when I go round corners etc (and sometimes when im stationary) I get a rattling noise. |