|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Quick question » Post Reply
|
Greasemonkey |
posted on 18th Jun 04 at 13:09 |
i bet ya any money if ya just paint the whole knob after its fully dry if ya get a very sharp scapel blade you could scratch the paint off without damaging anything just take ya time | |
S4M |
posted on 18th Jun 04 at 12:58 |
yea but it wont light up, because the paint wont let the light thru | |
Drysdale |
posted on 18th Jun 04 at 12:54 |
if its clear coloured then it can still be painted.. | |
S4M |
posted on 18th Jun 04 at 12:52 |
U wont be able to use to touch up on the gold bit coz its clear coloured plastic. U know the bit i mean? it seems lyk its moulded into the knob so it wont pop out witout snapping | |
Drysdale |
posted on 18th Jun 04 at 12:48 |
It will come out, just needs a bit of 'welly'. Try using a mini screwdriver or similar. Otherwise you could spray the whole thing, then when thats dry use a small paint touch up pen on the gold bit and mask the rest of the knob. | |
S4M |
posted on 18th Jun 04 at 12:45 |
Im spraying my heater knobs and have removed them. The middle one (the one with the rear heater symbol on) i cant seem to remove the gold plastic bit in the middle. If i spray it then the paint, primer and laqure will get on this and look pants. any ideas on how to cover it up to paint the rest of the knob?? i tried masking it but its too hard Thanks in advance |