corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Throttle Body » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Wolf In Welsh Clothing

posted on 1st Jun 04 at 22:39

The throttle body is restrictive on the MG where as the inlet manifols are restricted on vaux's.
Just the different way manufacture's do things.
Using an enlarged throttle body on a Vaux won't give much power like changing the inlet on an MG also won't give much power(dont quote me on that though).


Cybermonkey

posted on 1st Jun 04 at 21:52

quote:
Originally posted by corsa-sxi
he is talkin bout the corsa C cybermoneky, im sure regal could sort you out with a dblas inlet for around the £900 mark with gains of 20bhp


Yeah i know, since he mentioned twinport, i was just using it as an example :rolleyes:


AJBek

posted on 1st Jun 04 at 12:43

quote:
Originally posted by MikeH
if you have a 1.4, could you not fit a 1.6 TB if they are any bigger?


90% sure they are the same, or at least they were for the old X16XE and X14XE.


MikeH

posted on 1st Jun 04 at 12:01

if they are a bigger diameter then they probably will.


Corsa Wheels

posted on 1st Jun 04 at 11:54

any one know if the 1.6 or 1.8 sri bodies will gain an advantage? i know a 1.6 twinport is made in the astra now.


MikeH

posted on 1st Jun 04 at 11:26

if you have a 1.4, could you not fit a 1.6 TB if they are any bigger?


James R

posted on 1st Jun 04 at 11:09

Regal do, do a enlarged TB for the 1.4/1.6, but it's more than likely it will loose you midrange torque by reducing airspeed. If you want more power then just get a torque tube type thing for the inlet.
P.S 20BHP from a TB and air filter means either the engine is very resitricted by the TB from factory (not so likely) or he's quoting max power figures.


broster

posted on 1st Jun 04 at 10:45

quote:
Originally posted by Corsa Wheels
900 quid?!!? My friend got his body for £130 from demon tweaks!!


the new throttle body single one, will cost about 200ish from regal, if you want big power then a new inlet manifold or throttle bosies, more than one, are the way to go


Corsa Wheels

posted on 1st Jun 04 at 10:43

900 quid?!!? My friend got his body for £130 from demon tweaks!!


corsa-sxi

posted on 1st Jun 04 at 10:33

he is talkin bout the corsa C cybermoneky, im sure regal could sort you out with a dblas inlet for around the £900 mark with gains of 20bhp


Corsa Wheels

posted on 1st Jun 04 at 10:08

Yeh basically it is a 50ml bigger inlet on the replacement body. The old body came off and the new one clamped straight on. My 1.4 has only got 90bhp standard spec, so obviously im looking for ways of getting that a bit higher with out spending that much!! (I bought it brand new two months ago, so funding is a bit low at the moment!!)


Cybermonkey

posted on 1st Jun 04 at 10:04

BTW, over 200bhp can be got from the 1.6 corsa engines. thats a 100bhp gain


Cybermonkey

posted on 1st Jun 04 at 10:03

so i presume hes bought a repleacement item with a single butterfly? I think 15bhp could be possible. Im not familiar with the MG's engines though. Others might be able to help you out when it comes to bits for your engine, but i expect stuff is very thin on the ground.


Corsa Wheels

posted on 1st Jun 04 at 10:00

Hi, a friend of mine has just taken delivery of a shiny new throttle body for his ZS 120. He reckons a 20bph increase with this and a pipercross viper. This sounds fairly tasty and I was wondering is such a device is available for my Corsa. Ive got an 04 reg 1.4 corsa with the twinport engine. I was hoping that the variable intake manifold that this engine has wont stop me from fitting one of these, but being a new engine type im finding it difficult to get engine parts. Anyone know who I can speak to about finding one of these items?