|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Crap Radio Reception » Post Reply
|
Dom |
posted on 21st May 04 at 18:31 |
then connect the remote lead to the ISO block (blue wire from HU to blue wire on car iso block) and that shall do the job :) - although your date wont show up, you will need to cut the grey/red wire (car side) on the iso block. | |
ash_corsa |
posted on 21st May 04 at 18:20 |
i havent cut any wires at all | |
Dom |
posted on 21st May 04 at 16:48 |
aye...if you look on the MFD pin coming out of the ISO block, you will see a black cable and this is what goes to the booster, so just chop the grey/red cable and not both of them, it should work then :thumbs: | |
corsa-sxi |
posted on 21st May 04 at 09:01 |
i have the pioneer 6500 and have same problem, i sometimes hear static in areas | |
b0bby |
posted on 21st May 04 at 08:49 |
cant you find alternative power for the booster? :S just a thought | |
AdiSRI |
posted on 21st May 04 at 00:30 |
its at the base of the aerial, but if u cut the wire to keep the display working it curts the power to the booster. | |
ash_corsa |
posted on 21st May 04 at 00:10 |
wheres the ariel booster mate? | |
AdiSRI |
posted on 20th May 04 at 23:51 |
i have the same problem, but on mine its because i disconnected the aerial booster inorder to stop the MFD display turning off. | |
ash_corsa |
posted on 20th May 04 at 23:47 |
Alright Lads |