corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » got headunit fitted but it jus stopped :S » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

gsi-gaz

 posted on 29th Apr 04 at 09:10

yup

all are included in the iso block


Jason

 posted on 27th Apr 04 at 10:41

is there supposed to be a seperate earth running from the HU to a bare point on the car? or are all cables needed running from my plug including the earth?


Pablo

 posted on 27th Apr 04 at 07:21

earth keeps blowing ur outpu chips I had that in my bravo ! Ur wires are wrong somewhere


Jason

 posted on 26th Apr 04 at 20:56

still no joy 5 HU's later


Jason

 posted on 26th Apr 04 at 18:54

yea think il leave it for a bit


Richie

 posted on 26th Apr 04 at 18:53

its probably fnarged then mate. try leaving it for an hour or so and try again


Jason

 posted on 26th Apr 04 at 18:47

well it happened as i was turning it up so maybe the internal amp?

lol its not worth fuck all so shall be going to the bin till i get this alpine unit!!


Richie

 posted on 26th Apr 04 at 18:40

Maybe the speaker connector on the ISO plug has come loose? Take it out and double check.

If its all in ok, faulty headunit. Must go back home.


Jason

 posted on 26th Apr 04 at 18:38

checked the fuse's too its fine and all connections are good


ed

 posted on 26th Apr 04 at 18:38

http://www.corsasport.co.uk/board/forumdisplay.php?fid=3


Jason

 Icon depicting mood of post posted on 26th Apr 04 at 18:36

"modified" the vaux plug (well jus removed the mfd bit) and fitted all works well then i do a final fit works well again... then the sound jus stops? everythin still works cept it aint putting sound out any ideas??:(

[Edited on 26-04-2004 by Jason]