ive got the rev counter working now :) there was a green wire connected to the ecu plug but it didn't come off the other end.. i just cut it a rewired it straight to the dash..works great.. so anyone with 1.2 8v's fitting a dash with rev counter the wire is there..

it will be on the ecu wiring

thanks ill have a look..

There may be a green wire down by the ECU plug. If there isnt then you will have to wire it to the coil ect, not an easy job.

do i have to wire it up from the dash to ecu? and anyone know where it connects on the ecu?

Rev counter wont work due to wire not being there, never usually is on a 1.2 8v

its a 1.2 8v

Its definately not wired right then.
What engine is in the car your fitting it too?

also where is the green wire for the rev counter located?? i cant seem to find it!

dimmer control had no effect

Check the wiring then double check it.
Out of interest, do you have the dimmer control down as this can cause a buzz as the voltage won't be enough to drive the dash.

also the rev counter aint working.. :(

i've just got a digi dash fitted into my car..it came with corsa wiring tails already connected.. when ive joined them all up there is a buzzing sound coming from the car.. this stops when i use the indicators..anyone had this problem and know how to fix it..everything else works fine on the dash..:(