|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Turbo Parts help needed » Post Reply
|
miles |
posted on 17th Mar 04 at 21:27 |
Doesn't that upset the balance of the engine? Is that how all single turbo V6's work? I thought the turbo would be further down the exhaust system, once the 2 heads exhausts had merged. | |
James R |
posted on 17th Mar 04 at 16:09 |
yeah | |
miles |
posted on 17th Mar 04 at 10:48 |
So only 3 cylinders drive the turbo? | |
Kerry |
posted on 17th Mar 04 at 10:31 |
i think i would like to source a lotus carlton engine :P | |
James R |
posted on 17th Mar 04 at 10:28 |
Saab set up is a single turbo on one side. Beardy wouldn't i be easier to source the whole Saab engine loom ecu etc.... as it's design to run like that already?? Probably the complete and cheapest option. Just a thought. | |
Kerry |
posted on 17th Mar 04 at 09:56 |
quote: i was thinkin exactely the same as u but bein female i didnt like to say anything :o | |
mike16v |
posted on 17th Mar 04 at 09:35 |
quote: dont give him any more ideas :lol: | |
miles |
posted on 17th Mar 04 at 08:27 |
It wouldn't be a 5th injector either would it, it would be a 7th, and wouldn't you need an 8th as well? | |
miles |
posted on 17th Mar 04 at 08:24 |
Surely you could take the oil feed from a cooler sandwich plate, then you have a feed and a return, just run an oil cooler inline with it. | |
James R |
posted on 17th Mar 04 at 00:25 |
Thats cause Vx don't do a turbo V6, it's a Saab v6 turbo based on the VX lump you know ;) | |
BeArDy |
posted on 16th Mar 04 at 20:24 |
quote: kind off it was up as a Vauxhall Turbo for a V6 but on ringing garrett then said its a SAAB | |
James R |
posted on 16th Mar 04 at 20:23 |
Out of interested did you source that manifodl and turbo from a Saab?? | |
James R |
posted on 16th Mar 04 at 20:20 |
You'll need oil supply (off the pump) and return (in to the sump) | |
BeArDy |
posted on 16th Mar 04 at 18:57 |
5th injector cheaper then ECU | |
mike16v |
posted on 16th Mar 04 at 18:28 |
quote: not a problem when ure a drug dealer :lol: | |
Kerry |
posted on 16th Mar 04 at 18:26 |
i have also been told u will need an after market ecu for the correct fueling/timing and will prolly cost about 1k to set up | |
Kris TD |
posted on 16th Mar 04 at 18:24 |
hmm thinking about it maybe not, yes it is used o you can run a different il cooler. think the oil feed on my td comes from the block. | |
BeArDy |
posted on 16th Mar 04 at 18:16 |
will that give a oil feed? i was just thinking the sandwich block was to cool the oil getting in and out of the filter? | |
Kris TD |
posted on 16th Mar 04 at 18:14 |
may have to use a sandwich block to get an oil feed. meens you can then run a front mounted oil cooler too. | |
BeArDy |
posted on 16th Mar 04 at 18:10 |
what more would i need other than the below?? |