|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.4 16v Speed problem » Post Reply
|
James R |
posted on 4th Mar 04 at 13:46 |
ture I didn't :p but the std engine don't go that high:boggle: doens't even hit 6700 really. | |
Jambo |
posted on 4th Mar 04 at 13:42 |
u didnt say modded ;) | |
James R |
posted on 4th Mar 04 at 13:27 |
on a std inlet and exhaust set up as soon as you change the exhasut maniold it will move it. as will the inlet being modded (more so) | |
Jambo |
posted on 4th Mar 04 at 13:26 |
j1400 Peak power is at 5800rpm. | |
James R |
posted on 4th Mar 04 at 13:14 |
Mines pulls all the way to the 7750 limiter on the std cams thank very much | |
Jambo |
posted on 4th Mar 04 at 12:48 |
Peak power is not far from 5000rpm on an x14xe. | |
Mossy01772 |
posted on 4th Mar 04 at 12:14 |
CHEERS, I WILL TAKE A LOOK TONIGHT | |
James R |
posted on 4th Mar 04 at 10:41 |
IT's found under the car just behind the drivers side, (don't quote me could be passangers side) it's about the size of a can of bean, abotu 7-12 for a new one, if that's blocked the you'll find the engie won't get the fuel | |
Mossy01772 |
posted on 4th Mar 04 at 10:03 |
where can i find the fuel filter, also its only started since i put some fuel system cleaner called fuel guard. | |
James R |
posted on 4th Mar 04 at 09:53 |
Fuel filter ;) | |
Adam-D |
posted on 4th Mar 04 at 09:36 |
id check the plugs were fitted right and check the leads too | |
Andy GSi |
posted on 4th Mar 04 at 09:27 |
well it should pick up at higher revs, its 16v, as skarkie said! try cleaning ur air filter, or re-set the ecu! | |
Mossy01772 |
posted on 4th Mar 04 at 09:02 |
serviced last week oil (gtx magnetec) and plugs. problem geting worse, serious power loss now | |
starkie |
posted on 3rd Mar 04 at 18:31 |
its a 16v engine its meant to be up at the limiter at least once a week its prob choked get out and boot its erse | |
Black Corsa SRi |
posted on 3rd Mar 04 at 17:28 |
quote: not that this helps you prob as such, but yeah, as u say also, mine pulls fine between 5 and 6 thou so its def a prob rather than just norm. I try not to take mine to those sort of revs too often anyway dont wonna wreck the engine!! | |
broster |
posted on 3rd Mar 04 at 11:40 |
when was the last time it was serviced? | |
Mossy01772 |
posted on 3rd Mar 04 at 11:37 |
its always been fine till now | |
broster |
posted on 3rd Mar 04 at 11:35 |
they usually hit a flat spot around there mate. | |
Mossy01772 |
posted on 3rd Mar 04 at 11:31 |
when i boot it and the revs get to about just above 5thousand is goes really flat and struggles to pull through the rest of the revs, this dosen't always happen though it can be fine, seems to do it after i have been giving it some for a while. its decatted as well. |