:(

Iv done that and used bike oil with teflon in.

So what exactly could i do tho. I moved those bolts last night and it did shat all :lol:

take the door card off and inspect the runners mate.

Oiled it but it dont go up much quicker. Any other things i can do?

alright then its wd40 when im home lol

Just use WD40 FFS! :lol:

Or take the door card off the inside of the door and you will see the runners.

They you can loosen all the bolts you like but when your window falls off its runners after you do it wrong, you'll be thinking why didnt i just spray a lil wd40 on it in the 1st place!

Bump

?

What with these bolts someone said you can unloosen and move?

Spray it down the runners mate.

Stick the straw down the rubber seal and give it a few blasts.

Try the window and repeat!

So where do you spray it then?

WD40 FTW! had the same problem with a mates vectra.

I know this is bumping an old topic but saved making a new one.

My windows are quite slow at opening and closing. So unloosening these bolts will speed them up?

How much do you need to unloosen them by?

Yep, I got exactly the same thing. To fix it I adjusted the window mechanism. There are two bolts under the door card that you can slacken, slide left/right and then re-tighten.

get some down front and rear runner let it soak in for a couple of minits then try the windows

cheers m8, ill give that a go 2day

spray wd40 down the runners this should fix it

right, ive got a 98' sport and when the windows get below half open they slow right down, n the drivers' stops, they're a bit beta goin up, but its still annoying when u want to open ur window fully u have to push it down! i was thinking its just grim and dirt in the runners, but just wanted to ask if any 1 else had experienced this before?:thumbs: