corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » hiya.....help needed » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

EastLondon SRi16v

 posted on 20th Feb 04 at 22:53

cheers guys. you are all stars.

Jay


bubble

 posted on 20th Feb 04 at 22:40

if u remove the casing ull have a ace route for the power cable:thumbs:


EastLondon SRi16v

 posted on 20th Feb 04 at 22:36

Hiya. The car i'm gonna work on this sunday is a 1.0 Corsa C. I haven't worked on mine because i've spent too much time on my Bravo etc.

I have loads of stuff for the Corsa but no time. The HU shouldnt be a problem, it was more the Amp wiring i was concerned about.

Cheers,
Jay


bubble

 posted on 20th Feb 04 at 22:33

quote:
Originally posted by EastLondon SRi16v
hi guys. just need some help. i'm going to fit a new kenwood HU an steering remote adaptor on sunday.

1. do i need to swop the red and yellow power wires to keep memory?
2. how do i keep the display?
3. with adaptors, what's the speaker size to use for the front doors? is it 16 or 17cm?
4. what's the best way of routing the power cable through the bulkhead?

The car is a corsa 1.0 but i'm asking coz my car (1.4 SRi) is still standard. They are both the Corsa C by the way.

Thanks for the help in advance.

Jay


1-try before and after swopping.
2-to keep display will need a autoleads box to convert, if not will show time/date wen cd on, and blank when radio on.
3-17cm
4-undo battery stay, slide over and ull see a plastic casing. remove with torx25 and route wire down there-itll come through past your BCM and into behind glovebox:thumbs:


daman2k

 posted on 20th Feb 04 at 22:30

think hes got 2 cars


Mattb

 posted on 20th Feb 04 at 22:29

fitting into a friends car perhaps.....

on you'r first question, wire up ya headunit, try it and see if it keeps memory, if not swap the wires


bubble

 posted on 20th Feb 04 at 22:27

before i tell u how can it be a 1.0 and then a 1.4 16v?


EastLondon SRi16v

 Icon depicting mood of post posted on 20th Feb 04 at 22:09

hi guys. just need some help. i'm going to fit a new kenwood HU an steering remote adaptor on sunday.

1. do i need to swop the red and yellow power wires to keep memory?
2. how do i keep the display?
3. with adaptors, what's the speaker size to use for the front doors? is it 16 or 17cm?
4. what's the best way of routing the power cable through the bulkhead?

The car is a corsa 1.0 but i'm asking coz my car (1.4 SRi) is still standard. They are both the Corsa C by the way.

Thanks for the help in advance.

Jay