no problems, everybody needs help.

ok, nice one, cheers for all ur help lads :) i'll do sum reseach

yeah they will be fine.
i have the gmax kit on mine.
cost me £195 and i would recommend them.
all depends on the quality you want.

dampers are shox, so the spax kit your talking about has springs and shox, you can just how hard the shox are and adjust rebound etc, i would get Koni or Bilstein as mentioned above, maybe even some FK coilovers then it can be as low as ou need

i'll do a bit of research, seen these for sale:
spax adjustable dampers (28 positions from soft to hard)
- 40 mm lowering springs
what dya recon? wud these do the same job or would i need shocks 2? (sorry if that seems like a stupid question but i know next to nothing about suspension)

quote:

---

Originally posted by Ryan L
Koni or Bilstein

---

any particual ones m8?

Koni or Bilstein

that sounds about rite dunt it?

around 3-400

how much you willing to spend?

yer, it wud b shocks and springs. shud i stay away from apex?

all depends on you ££££
and if your doing shocks and springs or just springs.
my advice is do the lot, shocks and springs.

rite, ok m8, i'll go for 40 coz i dont want 2 many problems.
which suspension do u recon i shud go 4?

go 40mm mate, trust me.
i have the same kit and 17" and have major problems.
i'm also down 60mm and its too low.
fed up of playing with my archs.
look in my garage mate if you want any pictures.
go for 40mm, thats from experience.

i was also thinkin a 40mm drop but do u think the psg front wil cover slight speed bumps? or wud i have to go over them at a queer angle? for make; i was thinking spax. apparently these would also be alrite for when i did my conversion

correct offset being et45?

i think u should be ok with 40mm drop m8 as long as u get the correct wheel offset

ttt

^^^^ on a corsa B thats gonna have 17's and a psg wide arch kit on. not sure how low i can go safely:boggle:
if ya cud tel me how low i cud go and what suspension would be ok then that wud b great:thumbs:
o yer,its also gonna have a 1.6 conversion (1.2 atm) so the suspension would have to be able to cope wiv that. thanks alot guys:)