it slots in place then im goin to put a bolt through the hole from behind to tighten it up.

how would you screw it in place now you have covered up the hole?

it will work on the neg but power will still go to it which i got told was dangerus

switch can go either side

put the swich on the positive not the neg

nice one! cheers mate.so on the switch power will be on one side and earth on the other??

bingo!

yet another class paint diagram

:thumbs:

nah im getting it all this weekend mate,i spose the convertor would go from the battery to the ps2 so the switch would go in between the convertor and the ps2?

it really is simple mate, do you have the power converter to run from battery to ps2?

mayb be a job for the pro's! im alright with a spray gun but dont know anything about electrics!lol

yeah simple. fit the ps2 wherever, make sure the black switch on the back is turned on.

then run the power cable from battery/fuse box to switch, conect the positive side, then conect other side to ps2 power in port.

n.b. will require cutting power cable/converter

then when i flick the switch the power will get through to the ps2 then you just press reset button to come on

[Edited on 08-02-2004 by Greg12v]

i want it to turnit on so i just have to press the reset button on the ps2 to get it going.anyway i can do this?

do you mean to turn it on, as in let the power through, or turn it on as in activate it.

easy enough just wire the ps2 up as u wud normally and chuck a switch in, in the power cable sumwhere :D

cheers mate,just need to work out how to wire one of them up to turn my ps2 on!!!

looks nice mate

heres some more pics of my gear stick console bit!
they are NOT flatted and polished yet as i only laquered them tonight!!! so no coments about that please!lol


the three holes drilled in front are for these when i order them off cobra148!!


i can do these for people if they want it doing. u2u me for prices.
:thumbs: