|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » spraying » Post Reply
|
Greg_M |
posted on 4th Feb 04 at 22:07 |
would metal degreaser be ok, that stuff for engines? | |
Greg_M |
posted on 4th Feb 04 at 22:07 |
quote: no i aint used, kinda figured that the plastic filler primer would be ok | |
Kris TD |
posted on 4th Feb 04 at 21:38 |
dont use white spirit, its oily. | |
Wilero |
posted on 4th Feb 04 at 20:28 |
or you could paint some vectra B rear door handles, they come in primer and i think their around £16 each. | |
M4rk P |
posted on 4th Feb 04 at 19:44 |
you should put plastic primer on first other wise the primer wont stick very well and could flake off. | |
combat_sri |
posted on 4th Feb 04 at 19:10 |
no probs mate,before i forget,have you got any plastic adhesive? always spray that on before you prime | |
Greg_M |
posted on 4th Feb 04 at 19:04 |
cheers mate | |
combat_sri |
posted on 4th Feb 04 at 18:59 |
texture wont be to bad on them then,might get away with filler primer. after you've used that give them a couple of light coats of grey so you dont need to use so much blue on them. | |
Greg_M |
posted on 4th Feb 04 at 18:56 |
im spraying some de-locked door handles in arden blue, got filler primer, grey primer, arden blue paint, and laquer | |
combat_sri |
posted on 4th Feb 04 at 18:55 |
what are you spraying and what colour? | |
combat_sri |
posted on 4th Feb 04 at 18:54 |
oh and its better to use degreaser,not white spirit, | |
Greg_M |
posted on 4th Feb 04 at 18:53 |
so which is it?:lol: | |
combat_sri |
posted on 4th Feb 04 at 18:52 |
if you put too much top coat on it can darken the colour so you wont have a proper colour match. | |
Red_SXi |
posted on 4th Feb 04 at 18:10 |
You can spray grey primer, but you don't have to, it wont effect the colour at all if you put enough top coat on | |
Greg_M |
posted on 4th Feb 04 at 17:26 |
tar | |
dazz25 |
posted on 4th Feb 04 at 17:18 |
Yeh you can spray it over the top! | |
Greg_M |
posted on 4th Feb 04 at 16:58 |
yeah i know that wanna know if i spray the gray primer over the top of the yelloow filler primer | |
Graham |
posted on 4th Feb 04 at 16:52 |
rite first of all i fink its a harsh grit u need, then white spirit it off, use a good filler primer to see imperfections, as obviously if they are bad sand them down with harsh grit, or to get it smooth use the filler primer, and a 1200 wet/dry, leave it to dry then prime once more and sand down agen this should be pretty smooth. | |
Greg_M |
posted on 4th Feb 04 at 16:50 |
im spraying door hadles btw, and its taking me ages to get it smooth. cos i cant get into the corners ect | |
Greg_M |
posted on 4th Feb 04 at 16:45 |
never done plastic spraying before.:o |