|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » has any1 fitted a apex 60mm sus kit » Post Reply
|
antz1 |
posted on 23rd Jan 04 at 20:12 |
wot about the rubber casin that sits on top of the bump stop, on the standerd shox it plastic but if u slide it of theres a bump stop on it, just wonderd if it woz the same, dont wona fuck my car up | |
Kris TD |
posted on 23rd Jan 04 at 18:44 |
you are supposed to use the front ones, the rear shocks are sealed iirc and the only way to get into them is to cut the top of the casing, wat i had to do you change mine to longer ones to stop wheels rubbing, then had to weld them back up. | |
antz1 |
posted on 23rd Jan 04 at 18:28 |
so they will d fine then, its just the fronts didnt hav any and i had 2 use the old 1s | |
Kris TD |
posted on 23rd Jan 04 at 18:09 |
they should have em standard, mine did | |
antz1 |
posted on 23rd Jan 04 at 17:32 |
, fitted mine last week, had 2 use my old bump stops and acouple of other bits on the front, and just fitted tghe rear as they came!then woz thinkin 2 day that did i hav 2 fit my bump stops 2 the rear as wel, :( |