|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » wiring my 6x9s to and amp? » Post Reply
|
wainey |
posted on 16th Jan 04 at 20:50 |
quote:depends on how u set up the amp though! and yes to run an amp, u need a positive from your battery, a ground from any good chassis point, and a switch wire, usually known as the remote, rca's go to the back of ya h/unit so does the remote wire, usually connects to a blue with a white trace wire but should say in the h/unit manual, then connect your speakers to the amp with decent speaker cable, + to + and - to -;) | |
greengoddess |
posted on 16th Jan 04 at 19:52 |
u have to connect the RCA leads as these carry the sound to the amp, connect your remote cable to the amp so it turns on with the head unit, connect power to the amp (fused) and then connect your speakers to the amp, job done.:thumbs: | |
Filby1 |
posted on 16th Jan 04 at 16:15 |
thats fine i think give it a go | |
sunnyb |
posted on 16th Jan 04 at 16:08 |
thats basically what i want thjo as i aint got a sub | |
Filby1 |
posted on 16th Jan 04 at 16:00 |
well if you look at it this way, the original speakers where run from a standrd head unit, dont think you need to conect the RCA to the head unit, doing this i think would cause the head unit to send the base just to the 6x9`s. | |
sunnyb |
posted on 16th Jan 04 at 15:55 |
I THOUGHT U HAD TO USE those RCA leads to connect to h.unit! dunno im probably wrong! | |
Filby1 |
posted on 16th Jan 04 at 15:53 |
if you have a sub then then wire the sub`s amp to the head unit this will cause the head unit to send the base to the sub, cant think of a reason why you would want to connect the amp the the head unit | |
sunnyb |
posted on 16th Jan 04 at 15:43 |
so connect old standard speaker wire from old speakers to amp, then wire up new speakers to amp, the RCA to the h/unit, the power to battery? | |
sunnyb |
posted on 16th Jan 04 at 15:42 |
any other opinions? | |
sunnyb |
posted on 16th Jan 04 at 15:29 |
cheers mate | |
Filby1 |
posted on 16th Jan 04 at 15:26 |
like this i think,left and right wire in to the amp then from the amp to the speakers then power it from your battery, all you need to do is use the wire that goes to the original back speakers then run that to the amp theb run some wire from the amp to the 6x9`s then a wire to ur battery. just hold on and see if any one else give any ideas first | |
sunnyb |
posted on 16th Jan 04 at 15:13 |
is this how i do it: |