Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » didgi dash FAO Cobra148 » Post Reply

Who Can Post?

All users can post new topics and all users can reply.

Icon:

Formatting Mode:
Normal
Advanced
Help

Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On

Post Options:

Disable smileys?
Turn BBCode off?
Receive email notification of new replies?


cobra148	posted on 14th Jan 04 at 12:12
	I'm a bit confused now, does what bolt straight in? If you mean my dash then yes, it is a digital dash from an Astra GTE but has been re worked and built into a Calibra clock housing, this is a much better shape to fit the Corsa dash. This is a front pic, you can see that just a tiny bit is cut away at the bottom corners to mount it.. The back has been rewired to plug straight into the Corsa loom and no wires need be touched, it also runs from the Corsa speed sensor so no need to add the Astra one. It now plugs in and out exactly like my original dials.
Chris R	posted on 14th Jan 04 at 11:54
	rob, does it fit ( IE bolt in) to the slot or is there a bit of fiddling. (I sent a email back to him as well)
cobra148	posted on 14th Jan 04 at 10:21
	It should be in the plug that your dials plug into, a green wire I believe.
Siberia	posted on 14th Jan 04 at 10:00
	just while i'm on the subject of clocks...... is there a cable like the speedo cable for the standard corsa rev counter or does the feed for the rev counter come through the plug that the clocks plug into?
cobra148	posted on 14th Jan 04 at 09:21
	quote: Originally posted by Siberia i if i find one of these i could just plug it in and it would work? I wish...No, theres a few ways to make it fit a Corsa, depending on how you want the finished job to look, some are more difficult than others. And theres a fair number of wires to connect, but its basically just swapping wire for wire.
Siberia	posted on 14th Jan 04 at 09:15
	i if i find one of these i could just plug it in and it would work?
cobra148	posted on 14th Jan 04 at 09:02
	Mines actually plug and play...simply plugs straight in, not a single wire to touch :D
neiliosxi	posted on 14th Jan 04 at 08:56
	U cant buy them mate, get them out of old astra GTE's, check your local scrappies.
stevegreetham	posted on 13th Jan 04 at 22:12
	how much are they?
AdamF	posted on 13th Jan 04 at 22:07
	loads of wiring but its not that hard really
Siberia	posted on 13th Jan 04 at 21:59
	does that that just plug on or is there a whole load of wiring to get it working>? [Edited on 13-01-2004 by Siberia] [Edited on 13-01-2004 by Siberia]