yes its bloody uncomfortable, i had it no rubbing mind but thats another story, so uncomfortable, i put 16's on and im rasing the back as its giving my back ache.

Mine's dropped 60 and scrubbed like feck and handled like a brick with 17's on....went for 15's....doesnt look as good but handles 200% better!! Get the right offset, take arch bolts out and you should be ok tho

Et 18, 19" dropped 50mm :D

mines 60mm back, cut some of the metal arch out, ok now, front is 40mm, catches a fair bit, 17s, et45

Major rubbing on bak!

mine is lowered 60mm front and rear on 17s, ET39 i think. Front is fine, but it scrubs on the back sometimes, and thats with arches flared and arch liner bonded on not bolted.

40 at the mo but i have et:40 so de-bolted anyway.

ok, wots urs lowerd by

yeah basicly all you do is take the plasic exterior arch off, take the bolts out of it and bond back on with out the bolts on.

offset is et 45, bin told mite need 2 take the 2 middle bolts out the arch

there will be mods needed, depends on the offset of your wheels. the best bet is to check out some specs of peeps cars then ask them. I have a mate the lowered 90 onto a set of 17's but that required major arch work. Corsa C's have a wider wheel arch so whould depend on model.

as above,,,,,,,,,,,, thanx:thumbs: