|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » is there any problems wen lowerin a corsa b 60mm on 17s » Post Reply
|
Kris TD |
posted on 4th Jan 04 at 18:00 |
yes its bloody uncomfortable, i had it no rubbing mind but thats another story, so uncomfortable, i put 16's on and im rasing the back as its giving my back ache. | |
LukeGSi |
posted on 4th Jan 04 at 12:18 |
Mine's dropped 60 and scrubbed like feck and handled like a brick with 17's on....went for 15's....doesnt look as good but handles 200% better!! Get the right offset, take arch bolts out and you should be ok tho | |
boyracer2002 |
posted on 4th Jan 04 at 12:08 |
Et 18, 19" dropped 50mm :D | |
mike16v |
posted on 4th Jan 04 at 10:06 |
mines 60mm back, cut some of the metal arch out, ok now, front is 40mm, catches a fair bit, 17s, et45 | |
Karen |
posted on 4th Jan 04 at 01:30 |
Major rubbing on bak! | |
drunkenfool |
posted on 4th Jan 04 at 00:57 |
mine is lowered 60mm front and rear on 17s, ET39 i think. Front is fine, but it scrubs on the back sometimes, and thats with arches flared and arch liner bonded on not bolted. | |
Greg_M |
posted on 3rd Jan 04 at 23:55 |
40 at the mo but i have et:40 so de-bolted anyway. | |
antz1 |
posted on 3rd Jan 04 at 23:53 |
ok, wots urs lowerd by | |
Greg_M |
posted on 3rd Jan 04 at 23:51 |
yeah basicly all you do is take the plasic exterior arch off, take the bolts out of it and bond back on with out the bolts on. | |
antz1 |
posted on 3rd Jan 04 at 23:49 |
offset is et 45, bin told mite need 2 take the 2 middle bolts out the arch | |
Greg_M |
posted on 3rd Jan 04 at 23:47 |
there will be mods needed, depends on the offset of your wheels. the best bet is to check out some specs of peeps cars then ask them. I have a mate the lowered 90 onto a set of 17's but that required major arch work. Corsa C's have a wider wheel arch so whould depend on model. | |
antz1 |
posted on 3rd Jan 04 at 23:44 |
as above,,,,,,,,,,,, thanx:thumbs: |