|
corb
|
posted on 3rd Jan 04 at 02:07 |
To get the best efficiency outta your amp, run it at its limits! If its 2ohm stable, run it at 2ohms if you have the capability to wire the load down to that, or 1ohm, 1/2ohm or some crazy American amps which go down to 1/4ohm :!
|
chris_mufc
|
posted on 2nd Jan 04 at 20:58 |
because i am new to modifying cars and ICE and everything and i was just wondering. so the best thing to do is just match up the ohms correctly. thanks a lot for your reply any way mate.
|
TOMAS
|
posted on 2nd Jan 04 at 18:10 |
If the ohms of the speaker are greater than, that which the amp pushes out it should be ok but will get quieter with the higher resistance of the speaker. If the speaker is lower rated than the amp it will be VERY loud and you risk setting fire/damaging the amp, so get it right!! Why do u ask?
|
chris_mufc
|
posted on 2nd Jan 04 at 17:42 |
what would happen if the ohms of the speakers are not the same as the ohms of the amp? would they still work?
|