|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Sub enclosure in spare wheel well? » Post Reply
|
Adam-D |
posted on 3rd Jan 04 at 16:06 |
quote: theres a can of holty tyre weld in my glove box and a rac membership to go wit it :) | |
corsa-fergie |
posted on 3rd Jan 04 at 15:57 |
what do u do if u get a flat tyre????? | |
Adam-D |
posted on 3rd Jan 04 at 15:22 |
sounds pretty good now ive sound deded :) the boot and the box :) ignoe the fibre glas round the edge that was the first attempt with fibre mat and resin that failed im not gonna tidy it up coz its under the carpet :) | |
Adam-D |
posted on 3rd Jan 04 at 15:18 |
| |
Adam-D |
posted on 3rd Jan 04 at 13:14 |
im just sound deading the floor as we speak | |
Adam-D |
posted on 3rd Jan 04 at 13:14 |
my port needs to be a little shorter and i think ill need wadding in there | |
corb |
posted on 2nd Jan 04 at 18:51 |
my port should be 2.5" in diameter and 16.25" long....................cos ive sold one of my subs :( | |
TOMAS |
posted on 2nd Jan 04 at 09:51 |
Did you work out the proper port Adam or did you just shove a tube in? You'll find that a proper tuned port makes a BIG difference... | |
Adam-D |
posted on 1st Jan 04 at 19:21 |
right i tried fibreglass and faild misrably :( so i got some hard board cut it to the height of the box "a big long strip" then screwed it to the posts all the way round then sealed it with sealent ported the box and put the sub in | |
baza31 |
posted on 1st Jan 04 at 18:04 |
how did u seal it?? | |
Adam-D |
posted on 1st Jan 04 at 17:37 |
heres a pic of mine | |
baza31 |
posted on 1st Jan 04 at 14:00 |
ive decided to do that. ive been thinkin about it and im gonna to make a cylinder type thing the diameter of the wheel well and the correct hight to make it the right size,(im gonna make mine out of fiberglass and mdf) , i know most 10s needs a cubic foot but i cant remember how much most 12s need. but i think itīll prob be deeper than the wheel well so ill have it sticking out of a piece of mdf on the floor and using fiberglass and prob chicken wire ill make it a volcano type shape. whats the diamenter on the wheel well?? | |
robtj |
posted on 1st Jan 04 at 13:51 |
my friends mum had that done in a vectra looked mint.. dunno how they do it but i would be interested to know. So i can fit my 1 15" sub there and build the boot nice around it | |
corsacdx |
posted on 1st Jan 04 at 09:13 |
Happy New Year to everyone! |