|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » gear linkage? » Post Reply
|
Colin.S |
posted on 23rd Dec 03 at 22:15 |
quote: Sorry, no pics There are 2 parts to the linkage, 1 is flatish and shaped abit like a '?', the other is just a straight bar with a plastic clip on each end (on some corsas the whole bar is plastic). you need to extend both parts by 15mm. It took me about 30 mins in total after i'd been to the scrap yard to get a metal bar from a nova. Or you could do what dave said, that way you wont have to mod the linkage. | |
Dave |
posted on 23rd Dec 03 at 11:46 |
If you do away with the spacer you shouldn't need to modify the linkage,you'll have to grind the gearox mount flat though so it sits flush against the gearbox.(Cheers Beardy;)) | |
DP. |
posted on 23rd Dec 03 at 11:43 |
Have you got a picture showing this? I take it you cut and then welded somethign to extend it? Which side of the linkage does this need doing to? | |
Colin.S |
posted on 23rd Dec 03 at 00:02 |
Yes, you need to extend the linkage by about 15mm (both parts) | |
DP. |
posted on 22nd Dec 03 at 21:08 |
Hi, |