corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » wiring help! » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Richie

 posted on 22nd Feb 04 at 16:51

If you have an aftermarket central locking kit though its usually the brown and white wires you have to tap into ;)


Chris R

 posted on 22nd Feb 04 at 11:29

you can do it with one switch. grab a SPDT switch - centre return type. wire the middle pin to ground and then in the driver kick panel find the CDL module.(located behind the ECU if yours is factory) tap into the brn/wht and brn/red. take those back to the switch and you can lock and unlock from inside the car.


corsa_godfather

 posted on 9th Dec 03 at 23:50

ok!would like to install a few switches in my car.one for locking and unlocking the doors when im inside the car.i have central locking so i would have to wire it in to central locking kit?not got a clue bout this stuff.