Yeah you just go to a scrappie or to vaux themselves.

can you get hold of the switches like the fog light switch from vauxhall so it fits in with the car?

basically instead of buying a powerful switch to handle all the current, you can just use a normal switch to activate the relay which can supply more current.

What does the relay actually do?

On your shopping list you want:

Quite a few metres of 20a cable (17a should be fine if you cant source 20a but do try)
A single pole single throw switch (SPST)
A 20A automotive relay.
Inline fuse holder rated 20a or greater.

[Edited on 10-12-2003 by AustinPXX]

Okey cheers!!!! What about fuse?

Sorry to be a pain, could you draw up a diagram of how everything should be wired?

I can have the ground on the negative of the battery cant i??

all you want is a SPST toggle switch to turn it on and off.

:boggle: do you know the name of the kinda switch ill need, im not to hot on what ya mean?? ill go to the shop n write down what there called coz the two types looked the same jus the silver one wasnt illuminated :boggle:

u trying to get his neons blown up or what??

3 prong switches can have 2 different wiring schemes.

1. Illuminated or non illuminated switch that requires a positive feed and a ground, with one prong spare for the switched output which you connect to your neon.

2.Non illuminated switch that has one prong for the supply and two prongs for the output.

yeah one with three would do fine just make sure you put the live and the neg next to each other on the switch and leave the other one bare or ground it...

ttt

Got some footwell neons but not 100% sure how to wire then up, i no i need a fuse and a switch but what kind of switch do i need? Seen some in motor shop with the three spokes as if the switch was to plug into something, is that the right switch???

Also what sort of fuse do i need and will i need a holder for it, and lastly, how would i go at wiring it all up lol diagram would be a great help!!!


Cheers