corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Help with wiring » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

jrsteeve

 posted on 4th Dec 03 at 21:01

cheers fella, i'm sure it'd be ok, but there are just so many bloody wires with these tvs.


Dom

 posted on 4th Dec 03 at 20:50

well i can only assume that you just have to swap the power and accesory feeds around, although at worst it should only a blow a fuse (dont hold me to that though lol).


jrsteeve

 posted on 4th Dec 03 at 20:46

will do, i know its that way for most units just wanted to double check as it aint a cheap hu.

cheers


Dom

 posted on 4th Dec 03 at 20:39

use the auto antenna for the remote lead :thumbs: should work a treat :)
And yea, there is something in the tutorial section about memory lost on HU's, have a butchers mate :)


jrsteeve

 posted on 4th Dec 03 at 20:35

Just changed my Sony headunit for a Clarion tv headunit, but the wiring is a little different. The 2 problems are:

1. The usual loss of memory, do i just swap the main power and accessory power cables round like with the Sony, or is it different.

2. There is no obvious remote cable (to turn my amp on when the hu is turned on. The options are:
+12v main power
auto antenna
illumination
+12v accessory
ground


Any ideas :boggle:


cheers