|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » heater control bulbs - having a mare » Post Reply
|
mike_1.2LS96 |
posted on 29th Nov 03 at 15:39 |
Its much easier if you unclip the vent section at the top. It will unclip if you pull hard enough starting at the top. Then you can unclip the bulb carrier from above without taking all the cables out - except the one its connected to ofcourse. | |
Dave |
posted on 29th Nov 03 at 15:31 |
Why do today what you can put off till tomorrow!:D | |
Bennn |
posted on 29th Nov 03 at 15:07 |
aye but i just printed off the tutorial without checking the haynes | |
the_legend_of_yrag |
posted on 29th Nov 03 at 14:54 |
You got the haynes manual?? | |
Bennn |
posted on 29th Nov 03 at 14:47 |
to be honest its a simple job just a bit fiddlier than i thought | |
Dave |
posted on 29th Nov 03 at 14:46 |
Its a piece of cake when you have done it before but the first time is a right pain in the arse!! I wonder why these bulbs are so keen on popping tho,I've never known it be a big problem on any other cars. | |
Bennn |
posted on 29th Nov 03 at 14:40 |
bollox | |
the_legend_of_yrag |
posted on 29th Nov 03 at 14:37 |
Mate more trouble than its worth gettin that bloddy thing out, i havnt got any bulbs behind mine at all lol. | |
Bennn |
posted on 29th Nov 03 at 14:33 |
ive followed cobra148s tutorial to get at the bulbs begind the heater unit to replace them with leds |