|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Running cables from the doors. » Post Reply
|
Makarus |
posted on 24th Nov 03 at 22:29 |
I will have to do that then, I dunno if mine has the full wirign loom in, I think it does because its an LS and tends to with everything else. | |
uprated |
posted on 24th Nov 03 at 22:09 |
my corsa doesnrt have the full loom so the only wires going to my doors were the speakers, i drilled the multiplugs out so theres a 1/2 inch hole through them both | |
Makarus |
posted on 24th Nov 03 at 21:35 |
Yeah I was trying it with the cloth behind the handle. How did you get through the wiring then?? | |
CRB 553 |
posted on 24th Nov 03 at 21:04 |
push the door card backand pull the winder out as far as possible u'll c a little black kinda horse shoe shaped clip, u need to stick a screwy underneath it and pull it it'll pop off so watch ur eyes lol | |
uprated |
posted on 24th Nov 03 at 21:00 |
i ask shitloads of questions, but ive got a haynes manual too, i spent about an hour looking at a wiring diagram, then bam, it all made perfect sense. | |
Makarus |
posted on 24th Nov 03 at 20:53 |
Yeah had a good look and can't find the little pin, tried that with the cloth and it doesn't seem to work. | |
mike_1.2LS96 |
posted on 24th Nov 03 at 20:43 |
Managed to get the clip off with a small electrical flat head screw driver. | |
James@CCC |
posted on 24th Nov 03 at 19:59 |
door handle u wanna just get some cloth, roll it up, put it behind the winder and do a kinda sawing action. a little clip will then come out and u can then just pull of the winder. u need the clip so if it flies of u gotta get on ur hands and knees. u can also get a special tool for it but theres no point really | |
Kris TD |
posted on 24th Nov 03 at 19:39 |
buy a haynes manual and it will reveal all. | |
Makarus |
posted on 24th Nov 03 at 19:27 |
How the hell can I get my cables for my speakers through to the cab of the car to the back of the head unit. I can see the rubber pipe but its an arse to get to and run the cables through. |