|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » anti-rollbar » Post Reply
|
Gambit |
posted on 25th Nov 03 at 16:42 |
22/18 is closer to a 1,1 ratio!! | |
corsa c14se |
posted on 25th Nov 03 at 16:29 |
from my experience,if you don't want aftermarket antiroll bars,the best combination to get nice,slightly oversteer during decelerration is 22mm front and 18mm rear or any other combination that has a 1,2 ratio (eg 22/18=1,2) | |
Gambit |
posted on 25th Nov 03 at 10:39 |
any manufacuter who makes an uprated rear anti roll bar for corsa's will be an extra bar that will bolt onto the bottom rear shock bolts and then bracket along the under sider of the rear beam. so effectiivly u have two on the rear | |
Kris TD |
posted on 25th Nov 03 at 10:19 |
tomas, its your hard shocks which are fucking you, i adjust my konis to soft in the wet and med in the dry. if you have the shokcs on med-hard in the wet you may aswell not bother turning the steering wheel. | |
TOMAS |
posted on 25th Nov 03 at 10:12 |
Im running Coilovers with 200lb springs. Its a 1.2 16V with rollbar but not sure on the 5-door thicknesses. My car handles REALLY bad in the wet and understeer's to death but AMAZING in the dry and tends to oversteer more than understeer!! So would removing the roll-bar improve my handeling? I also get the lift-off thing in corners where the inside wheel spins really bad lol and yet its only got 1.2 power... :lol: | |
Kris TD |
posted on 25th Nov 03 at 10:07 |
according in my info the combos dont have em, but then they have rear leaf suspention anyway. they do have bigger rear drums if u wanted to upgrade rear brakes though. | |
Cybermonkey |
posted on 25th Nov 03 at 10:03 |
kris, what thickness were they on the Combo's?? | |
Kris TD |
posted on 25th Nov 03 at 09:49 |
well considering the 1.2 8v has neither then i would defo get both. | |
Cybermonkey |
posted on 25th Nov 03 at 09:34 |
Front roll bars are 24mm on Sport 1.6's and GSis, i think they are either 12 or 20 onthe back | |
Gambit |
posted on 25th Nov 03 at 09:18 |
if you can get one for the rear also, then it'll make a vast improvement | |
beattie17 |
posted on 24th Nov 03 at 22:49 |
quote: | |
beattie17 |
posted on 24th Nov 03 at 22:48 |
ive got coilovers! n i can get an 27mm front anti-rollbar and a kit for the bk! so if i get front and bk wil this improve it 4 the better or worse? | |
James R |
posted on 24th Nov 03 at 16:38 |
I run with neither on mine, casued the inside wheel to lift off powering out of tight corners, but it does depend on you sus set up. | |
Gambit |
posted on 24th Nov 03 at 16:30 |
if your gonna uprate the front roll bar you really need to get a rear one also | |
MattyB |
posted on 24th Nov 03 at 16:04 |
26mm (i think) | |
beattie17 |
posted on 24th Nov 03 at 15:55 |
whats the thickness of standard gsi 1's? |