Also if you want to completely remove the door card you have to remove teh rubber that runs along the top of it, i never bothered when i was fiddling with mine but to completely remove if you have to

Here how to remove it:

1. There are 3 screws at the bottom
2. 1 screw in the hole under the door handle
3. Remove the handle surround as there's 1 there
4. Clip off the Tweeter cover as there is 1 there too

There are a lot of clips to undo, so be careful. Start unclipping them from the outside corner going towards the hinge side.

You don't have to take the door card completely off, I just got a mate to hold it up from the bottom so I could fit the speaker underneath. The rubber at the top of the door acts as a hinge.;)

unscrew - think there are about 3 screws - and pull, cause iy's clipped on too

Hi, Im looking at changing my door speakers, the mid and the tweeter. Could someone tell me how to get the door cards off, preferably with pictures? and how to get to the tweeter position and how the tweeters are mounted.

Sorry to ask so much but i need hte information so as i can change the parts ready for a meet next week.

Thanks for any advice
Mart