|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » leccy sunroof question » Post Reply
|
Neshol |
posted on 29th Nov 03 at 12:05 |
ttt | |
Neshol |
posted on 28th Nov 03 at 20:48 |
Does anyone know what the black/green wires are for then? Shall I wire it up direct to the battery with an inline fuse? | |
morty |
posted on 28th Nov 03 at 18:55 |
dont use the multi plug in the roof lining its not used for the sunroof? brown screws to the roof, 2 reds spliced into 1 then down the a pillar and into the passenger footwell into a 12v Ign live if possible, if not then to perm live, but fused...I cannot remember for the life of me where the blus goes? | |
Neshol |
posted on 28th Nov 03 at 17:16 |
Can anyone help at all? Right there's 4 wires from the switch unit, 2 red, a blue, and a brown. Now the blue and one red one go to the motor to control it, the brown is an earth, and the red is presumably the live. So how does this red wire correspond with the black and green wires in my headlining? Argh! | |
Neshol |
posted on 28th Nov 03 at 13:56 |
I'm also doing this, are these the right wires to use (green and black)? They both go into a multiplug. | |
flipmo |
posted on 21st Nov 03 at 14:54 |
i take it ill need to put a fuse in the fuse box for the leccy sunroof if im going to use the existing wiring | |
Gambit |
posted on 21st Nov 03 at 14:14 |
http://www.corsasport.co.uk/board/viewthread.php?tid=60428 | |
Gambit |
posted on 21st Nov 03 at 14:13 |
there is a tutorial on here somewhere for it | |
Neshol |
posted on 21st Nov 03 at 14:08 |
Are there 12v live and ground wires already in place as well? | |
Gambit |
posted on 21st Nov 03 at 14:04 |
yes the wiring is all there for it | |
flipmo |
posted on 21st Nov 03 at 13:30 |
hmm ok just been outside doing my leccy sunroof conversion and there seems to be wiring there already for it?!? is this possible as i didnt think the corsa in this country ever came with a leccy sunroof. its taped to the loom for interior light/alarm sensor and is quite thick wiring(green and black wires) and has a plug on the end. is it safe to use this? |