corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 17x7.5 on Corsa (ET45) » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

AdiSRI

 posted on 15th Nov 03 at 11:11

They r hard on standard arch corsa b. I have 7.5 x 16's ET45 and even with the metal cut right back to the spot welds and the archs bonded on it still rubs at the back. Has never rubbed at the front tho, im gonna get some 7 x 17's now just to stop the rubbing.


drunkenfool

 posted on 15th Nov 03 at 01:15

i was told 7.5" wide are really hard to get on standard arches, cos i was looking at getting the wolfrace matrix in that size but decided against it.


J da Silva

 posted on 15th Nov 03 at 00:34

aslong as the arch is cut out from underneath the arch trim u shud be fine with them mate


scoob

 posted on 14th Nov 03 at 20:07

shud fit a c or a corsa b with wide arches


Screaming Vtec

 Icon depicting mood of post posted on 14th Nov 03 at 19:57

Any ideas if these would fit a Corsa (either b or c?)

They are ET45's, but 7.5" wide.. I guess they'd be ok under a wide arched corsa..

PS the ones in the pic are 5 stud, I have 4 stud (4x100)



16.5'lbs for a 17" ;)