|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Fitting 2.0 16v Callipers, Discs, and Pads » Post Reply
|
Nath |
posted on 19th Nov 03 at 00:46 |
quote: Thanks TOMAS, thats the most helpful reply i have had. I had a chat with my dad and he's pretty condfident about doing this. I shall do this on the weekend after i recieve a parcel from mr postman :thumbs: Bennn, i wasnt being funny mate. I'm not a total novice, i just wanna make sure i do this correct as brakes are pretty vital :|:) | |
MC Kustoms |
posted on 16th Nov 03 at 19:44 |
mattyb u get my u2u | |
MattyB |
posted on 16th Nov 03 at 19:28 |
Yeah 16"s give great clearance, but make the discs look really small :( | |
Bennn |
posted on 16th Nov 03 at 19:22 |
quote: i never suggested for a second you werent | |
TOMAS |
posted on 16th Nov 03 at 19:08 |
Nath im running the same rims and theirs PLENTY of room. Right here's a quick rundown of fitting. Jack front end with wheels removed. Clamp the rubber flexy hose of the first caliper. Remove the hose from the rear of the caliper by undoing the bolt. Remove caliper (two allen bolts). | |
Nath |
posted on 16th Nov 03 at 00:26 |
I'm pretty competant thanks Bennn. Just wanna make sure i do it right, isnt that the purpose of this forum? | |
Bennn |
posted on 15th Nov 03 at 14:50 |
if you arent sure what you are doing id get it done by someone who does | |
Siberia22 |
posted on 15th Nov 03 at 11:25 |
I have 13" 4 stud wheels on mine do 14"s fit the stud or do other parts have to be changed? | |
MattyB |
posted on 14th Nov 03 at 21:42 |
Anyone thinkin of doin this, please remember you MUST have at least 14" x 5.5" wheels on ur car. | |
Nath |
posted on 14th Nov 03 at 21:21 |
How do u bleed them? | |
Nath |
posted on 14th Nov 03 at 21:21 |
As far as i know they arent brand new. Sounds pretty fool proof to me. | |
Gary Reece |
posted on 13th Nov 03 at 10:01 |
Siberia - Yes they'd fit straight on, and you get them off a 2ltr Cav or Astra GSi and a few other models | |
Siberia22 |
posted on 13th Nov 03 at 09:52 |
i have a 1.2 8v would these fit straight on and if so would i get them off an astra or cavailer? | |
and-m |
posted on 13th Nov 03 at 09:47 |
Are they new? If not renew the seals/sliders, give the sliders a good clean and grease them up, also use new copper washers on the lines. and some copper grease on the back of the pads. | |
lee mitchell |
posted on 13th Nov 03 at 06:45 |
just unbolt old calliper and disk and brake line and bolt new ones on and bleed them | |
Nath |
posted on 13th Nov 03 at 00:24 |
Anything i should be aware of or is it straight forward. |