|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Shortening Propshaft's & Driveshaft's » Post Reply
|
Ian |
posted on 24th Apr 04 at 20:04 |
Corsa track is 1388mm, Calibra turbo is 1426mm on the front and 1446mm on the rear. | |
PaulW |
posted on 20th Feb 04 at 23:38 |
Beardy... | |
BeArDy |
posted on 16th Nov 03 at 00:56 |
Used 4x4 system from Calibra Turbo. | |
PaulW |
posted on 16th Nov 03 at 00:45 |
:( | |
PaulW |
posted on 14th Nov 03 at 17:47 |
:wave: | |
PaulW |
posted on 13th Nov 03 at 17:46 |
taa muchly ;) | |
Kerry |
posted on 13th Nov 03 at 17:45 |
leave it with me ;) | |
PaulW |
posted on 13th Nov 03 at 17:40 |
Reminds me i need a pic of the underside of a cally tutrbo, or a floorpan layout pic or somethin like that, tried mig but there fekin hopeless, so if any of ya's can help me out pweeeese | |
PaulW |
posted on 13th Nov 03 at 17:23 |
well im getting all the info I can now, wont be starting it till around feb when I got a good understanding of what needs doing, etc... so thats when I buy the corsa & start stripping it, then pos about a month or 2 later get the cally t, then just start the fun bit of tryin to get it all on the corsa :lol: | |
Kerry |
posted on 13th Nov 03 at 17:21 |
u will have fun doing this as we did but make sure u plan and research well | |
PaulW |
posted on 13th Nov 03 at 17:18 |
nice one :thumbs: | |
Kerry |
posted on 13th Nov 03 at 17:16 |
me and my ex made a mk 4 escort into 4wd. welded a tunnel in but didnt lose the front passenger seat just rear. built it from a bare shell so also welded some box section in the front to strengthen things :thumbs: | |
PaulW |
posted on 13th Nov 03 at 17:12 |
quote: aye i know i need to do a tunnel or something, unsure if I'll be able to have a passenger seat because of this, only gona be a bucket tho! will also need to get a custom fuel tank made up, full alloy jobby more than likely & mount it where the rear seat used to be, etc... least I know its possible to shorten the shafts & stuff, not a bad price either | |
BeArDy |
posted on 13th Nov 03 at 07:36 |
yes it is poss and not that expansive, about 120 for a set of 2 shafts | |
and-m |
posted on 13th Nov 03 at 00:05 |
what are they for? | |
PaulW |
posted on 12th Nov 03 at 22:04 |
is this possible if there machined correctly to the correct lengths? Or would it be easier & cheaper to get ones made up? |