fk fronts are very low, mines, icys, and someone else on here got the 40/40 kit, and the fronts down at least 60 (so i put -40 p1 springs on front, its a bit higher, but still pretty low as the shortened shocks compress the springs a bit)

ok we'll see wot happens in the next few weeks, so can I ave comments on the wheels and whether there'll fit now? ( details given above) I'll get pics of how low the front is soon....ermm how'd u put pics on here?

Matt

[Edited on 13-11-2003 by Geeza10328]

[Edited on 13-11-2003 by Geeza10328]

stubbsy which is your's black or blue?:rolleyes:

just let it bed in for a couple of weeks before u assume it hasn't dropped, it does take a little while for the springs to adjust to having the cars weight on them.
Seen may peoples cars drop over time when they've fitted new springs

not with the kit that matt purchased you cant

u can get a 75/50 drop.springs

sounds about right for 40mm at the back for the tyres to be level with the arches. this is myn dropped 40mm

There is not 70mm 50mm kit matt

its either 60mm 40mm or 40mm 40mm

Scott

drive it a few days and let it settle.

Fitted a full FK suspension kit to my car, supposedly -60 at front -40 at rear. But I fitted the fronts and it literally did drop a good 60 if not 75 so the front wheels ( only standard 14" alloys at the mo) were under the arches by 10mm or so. However the rears I have just fitted today and I wud say it looks as if its dropped 20-30mm max. The wheels aren't under the arches but about level wiv em. Is this right? It is possible however I have been sent the wrong kit and I have the -75/-50 which wud explain the front bein very low, but again the back??? just don't seem low enough.

Now assuming I have the -75mm at front and -50mm at rear. Wud 16" alloys 7" wide with 195/45/16 rubber on fit at the front and rear without any problems. ( Thinking on Team Dynamics 16" Tornados ET45...wot ya think?) The front suspension is quite hard so not much movement. The rear still has a fair bit of movement but is harder than standard.

Comments appreciated

cheers

Matt

[Edited on 12-11-2003 by Geeza10328]

[Edited on 12-11-2003 by Geeza10328]

[Edited on 12-11-2003 by Geeza10328]