:lol:

oh great :rolleyes:

if he wants it he can come and get it :mad: :lol:

hmmm starange. i'd have to have a look again but you'll be lucky if i come down to pugneys just to have a look :P

i had to cut the cage out of my old mk3 astra cuz it was propa stuck in!

no i already knew about the tabs from things ive learnt in the past but already looked for them :(

ive left it now im gettin mad :lol: il send him the rest and continue with the cable saga when im calm :)

awww u bleeding!

some of the pins inside the cage will be pushed down. pull these up and the cage shoudl come out

is the cage bolted in??? Cages have metal tabs that bend upwards to hold them in the dash try to see if this is the case and bend the tabs down. I aint fitted a stereo on your kind of car before so i am just guessing what it could be,

yes there is a cage i dont know how to get that out either

im bleeding :(

Kerry have a look at where the head unit went. Is there a metal cage there? i don't remeber seeing it yesterday. if there is take that out cause it goes with the head unit. there should be wires behind there for the arial and the cd autochanger.

yeh but i cant get behind the dash at the headunit end to see where it goes

ive already ragged somat in rage :!

well in that case the wires will be part of the loom i would of thought, check what wires are at the plug at either the head unit end or changer end and follow these through the loom cutting them out as you go, if this is the case remember to tape the loom back up, before you do this get some cable ties and balck electrical tape, to replace what you have had to cut.

yes i did them 2 screws like u showed me, that was the easy bit. then i brought the glovebox in the house and had to undo a further 5 screws to get it off the glove box. now thats all packed and ready to go but i cant get the changer cable out :(

still not done it!

its factory fitted and its windin me up now :mad:

Well the cable from the changer, will run to behind the head unit me thinks, its not a great distance for the cable to travel. Follow the cable from the changer, if it was installed after as in not factory fitted the cable will probably be cable tied under the dash, just follow the cable and cut it away from fixings as necessary

ok ive removed the headunit and the glovebox, then taken my changer out of the glove box and its all packed neatly in a box :)

he says all he needs is the changer cable, any idea how i remove this please :(