|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » cold air feed » Post Reply
|
The Guru |
posted on 5th Nov 03 at 11:28 |
| |
MikeH |
posted on 4th Nov 03 at 23:54 |
No you can get the semi rigid stuff as well as that bendy stuff you've used. | |
dave17 |
posted on 4th Nov 03 at 23:53 |
yes i got mine from b&q, its too wide but i thoguht id use it anyway! | |
MikeH |
posted on 4th Nov 03 at 23:06 |
you can buy 3 metres of 100mm ducting fromB&Q warehouse (in the extractor fan section) | |
uprated |
posted on 4th Nov 03 at 22:30 |
i bought that halfords crap and it unwound itself into a long strip of tinfoil, got a red pipercross now, | |
AndyCorsa |
posted on 4th Nov 03 at 21:58 |
quote: Gutted :( Teach you to buy anything from halfords ever again :thumbs: | |
Graham |
posted on 4th Nov 03 at 21:51 |
jus use the tumble dryer tubing, pretty good ive herd and then get a prof aluminium end cap to hold it in place on the front grill so it looks sweet! | |
mike_1.2LS96 |
posted on 4th Nov 03 at 21:39 |
dont get the crap from halfords. I stretched it out and it tore like toilet paper :( £4.50!!! | |
AndyCorsa |
posted on 4th Nov 03 at 21:34 |
I bought some ducting from local motor shop, cost me about 3 quid. Got it running from the front lower grille. | |
and-m |
posted on 4th Nov 03 at 20:47 |
think yuo mean tumble drier dude | |
chris_uk |
posted on 4th Nov 03 at 18:50 |
abit of ducting from a washing mashine | |
koolkorsa |
posted on 4th Nov 03 at 18:35 |
riteo. now for wot to use? | |
Greasemonkey |
posted on 4th Nov 03 at 18:24 |
I f i can remember rightly there is a high pressure area just behind the head light. | |
koolkorsa |
posted on 4th Nov 03 at 18:21 |
wanna put one to the hole i made at the bottom of my air box. 2 questions. 1) where's best to run it from? i.e. wheres there a load of cold air 2) cold air feeds in halfords are 22quid, which i fort was expensive. can i get cheaper elsewhere, or can i use something else to do the same job>? not botherd bout how it looks realli. |