|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Spraying Help!!!! » Post Reply
|
| kev_corsa |
posted on 11th Aug 03 at 17:09 |
ok cheers kris! i was talking to rob at ab styling today and he said it may have been down to silicon in the air, which is caused by deoderant and after shave! he said any silicone based products will cause a reaction, so i might try being smelly for a day or so. :) | |
| Kris TD |
posted on 11th Aug 03 at 17:02 |
hmm, ill consult with my dad as he knows slightly more than me, still think you will need to use an isolater though | |
| kev_corsa |
posted on 11th Aug 03 at 16:44 |
no it was two pack primer with a single pack acrylic base (black 2). | |
| Kris TD |
posted on 10th Aug 03 at 20:23 |
if this is the case then you need to spray over the primer with an isolater then paint on top of that. | |
| Kris TD |
posted on 10th Aug 03 at 20:12 |
what sort of base coat did you use? sounds like you have used cellulose paint over a synthetic primer. | |
| r8cr |
posted on 10th Aug 03 at 18:35 |
Did you leave the primer long enough to dry?? | |
| fcukniles |
posted on 10th Aug 03 at 17:03 |
how u spray? | |
| kev_corsa |
posted on 10th Aug 03 at 16:50 |
Hey everyone, i need some advice, ive been spraying some of the parts for my car and i prepared all the things really well and used a 2k primer. When i sprayed the first coat of base over the primer, a reaction occured! anyone know why this was? how can i sort it out? |