|
|
Grant0014
|
posted on 16th Sep 14 at 19:15 |
Thanks,
having done more research into those alloys i have no chance of them fitting.
Does anyone no of any 16" alloys that are quite wide that will fit? for track use
Thanks
|
taylorboosh
|
posted on 15th Sep 14 at 22:15 |
Id imagine they are totally wrong
|
davegreen
|
posted on 15th Sep 14 at 21:59 |
did not read that part. :facepalm:
|
Ian
|
posted on 15th Sep 14 at 10:52 |
There's a 4x100 option.
|
davegreen
|
posted on 15th Sep 14 at 03:57 |
no, as the corsa's are 4 x 100 bolt pcd.
|
Ian
|
posted on 14th Sep 14 at 23:25 |
Firstly J is the bead pattern and nothing to do with the width.
I would think it will be close and the offset is quite critical because it needs to make the most of the space between the arch and the damper. Measure that as a starting point. I'm sure its possible and has probably been done but the tyre choice is also important, I doubt it will be without problems and you'll probably lose most of the suspension travel.
That said, I'm also aware its not a decision you'll base on merit.
Just read that spec again - ET0? The bolt face is in the middle of the wheel? Surely it must mean they have no value for that because ET0 would only give you around 4" before the wheel left the arch so at >8" width you'd have 4" of protrusion on the rim. I know you scene boys love a bit of MOT failure but that wouldn't work at all.
|
Grant0014
|
posted on 14th Sep 14 at 20:31 |
Hi i'm looking at buying a new set of alloys for my Corsa c, but not sure if they will fit.
description below
XXR 527 16" x 8.25J 4x100 4x108 ET0 FLAT BLACK MASSIVE WIDE RIMS ALLOY WHEELS
was wondering if anyone knew if this will be ok or if anyone has had similar size alloys
thanks
|
