corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » EML » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Ian

posted on 13th Dec 13 at 20:46

Speedo flicker may be an unrelated issue then. Hopefully won't return.


fionamarie

posted on 13th Dec 13 at 16:14

Thanks guys, just wanted to let you know that my son seems to have fixed it. He disconnected the air mass sensor and cleaned it with thinner, now it seems to be working fine, no EML on dash for the time being, fingers crossed.


fionamarie

posted on 13th Dec 13 at 14:26

Based in Ashton-in-Makerfield, my son has told me when his engine was running, and the car stationary, he had his interior light on and as the speedo moved the interior light was brightening and dimming, could this be something to do with the alternator?


Gary

posted on 13th Dec 13 at 13:46

£20-£50 to read fault codes normally.

Where abouts are you? Someone may know a good/cheap local place.


fionamarie

posted on 13th Dec 13 at 13:27

thankyou for your reply Ian, a proper code reader? does that mean he needs to take it to a dealership/garage and whats the cost approx?


Ian

posted on 13th Dec 13 at 12:06

You can't paperclip a 1 litre.

Need a proper code reader on it.

Never heard of the speedo moving while stationary. You do have a digital transducer in that car so it may be to do with that. Code reader will hopefully shed more light on it.


fionamarie

posted on 13th Dec 13 at 09:48

my son has a corsa 1998/99 1.0 GLS and his EML came on last night and the speedo started to flcker up and down when stationary, since then the speedo is ok but the EML is constantly on. We searched the forums and found the paperclip test however when bridged across 5 & 6 and instructions followed, nothing happens the EML remains on. He has noticed there is no metal connection in one of the ports of not sure whether it was port 5 or 6. Any advice gratefully appreciated.