|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » How easy isit to swap a 1.2 16v engine with a 1.4/1.6 16v? » Post Reply
|
*Adz* |
posted on 26th Apr 11 at 14:28 |
So prob easiest to stick with a 1.2 then. | |
AlexW |
posted on 26th Apr 11 at 08:25 |
The 1.0/1.2 dash loom is different, in the case that the ecu is bolted to the inlet on those engines, and the plug is very different to a 9pin plug found on a sport. | |
*Adz* |
posted on 26th Apr 11 at 06:33 |
So whats not plug and play then? i did hear they was different to other corsa's etc... but it can be done fairly easy i take it? | |
AlexW |
posted on 25th Apr 11 at 23:28 |
In the fact that I answered a load of his questions and his isnt even properly finished. | |
DansCorsaSXi |
posted on 25th Apr 11 at 21:03 |
Shaun is the man if you want to know about 1.6 conversions :P | |
shaunmods |
posted on 25th Apr 11 at 21:00 |
Its not plug and play unfortunately :( Heres a tutorial on how to do the conversion - | |
*Adz* |
posted on 25th Apr 11 at 19:54 |
Ive got a X reg 1.2 16v corsa |