i have a hole in my bumper and the fibreglass has all cracked!
i made up my own brackets for the delta evo, with some threaded bar and brackets, i hit the bumper on a kurb other day! no the bar is poking through the bumper cos i wacked it!! DOH
im just going to take it off and fibreglass up the area where the hole is and file the bracket down, then fill the hole and then get it sprayed!
that glue and paint idea sounds good as i have a small stone chip on the other side!

:thumbs:

What you are describing sounds like cracks in the Gel-coat. This is a final layer over the fibre-glass that gives a smooth finish ready for painting. Painting ovrer the cracks wont solve this as they will just come through the paint.
The only way to really solve it is to use a dremmel to cut the cracks into larger grooves and fill the grooves with gel-coat.
Tricky if you dont know what you are doing, time-consuming too.
A good tip to solve all manner of problems in fibre-glass ie stonechips cracks etc is this...
Bear in mind this WILL NOT give a perfectr finish, but can be used to disguise a lot of problems.
Get some 2-part epoxy glue like Araldite, and some paint the right colour for your car. Mix up the glue as the instructions say, but as you mix it, spray some of the paint onto it and stir this into the mix. The araldite will take on the colour of this paint and you can use this as a filler or adhesive to fill stonechips or cracks, or to stick broken bits back on.
:)

u cant hardly see it il just touch it up n hope it dnt get worse

yes

yeah like its been crazed.

thats what seems 2 have happened with mine kris not an actual crack just a line in the fibre glass

its generally the coating they put over the fibreglass strands which cracks. only way to prevent this happeneing is too prepare the bumper or skirts properly in the first place. if it has happened then it needs to all be sanded back and started again on the infected area. my rear bumper has done this too, solved it now hopefully.

yes they will

my skirts will probably crack too, same idea to fix them??

my mate whos spraying em said if they crack hopefully paint will sink in to them and maybe ranother top coat would be enough.... but wont the cracks get bigger?

i would take the bumper off, place a piece of matting on the back where it is cracking, sand the cracks off, fill it back up to the correct level then spray it again.

quote:

---

Originally posted by dannycorsa c
dont touch any kurbs or speedbumps or its byebye bumper

---

dont touch any kurbs or speedbumps or its byebye bumper

dietrich rs only little 1s near the lights they were there when they put da bumper on. fibre glass is to much hassle wont bother next time

quote:

---

Originally posted by dannycorsa c
how can i stop them from getting bigger.iv been told to use abit ov clear nail varnish to seal them does this work???:boggle::look::wave::rolleyes::thumbs:

---

how can i stop them from getting bigger.iv been told to use abit ov clear nail varnish to seal them does this work???:boggle::look::wave::rolleyes::thumbs: