|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Urgent Alloy Advice Needed! » Post Reply
|
Aleex |
posted on 26th Oct 09 at 16:35 |
beautiful, cheers for the advice :) | |
scottyp1989 |
posted on 26th Oct 09 at 16:05 |
they will not rub lowerd 40, mate has them on his lowerd 90mm on back and has no rubbing | |
jo1945 |
posted on 26th Oct 09 at 16:02 |
shouldn't do, I'm pretty sure thats the size most people use on 16's. As you're only lowered 40mm and the offset isn't too far wrong it should be fine. | |
Aleex |
posted on 26th Oct 09 at 15:03 |
?? | |
Aleex |
posted on 26th Oct 09 at 13:06 |
i thought 195/40/16 tyres would rub :/ | |
jo1945 |
posted on 26th Oct 09 at 12:45 |
they shouldn't stick out enough to fail an mot, and if you're only lowering by 40mm, 195/40/16 tyres will be fine. | |
Aleex |
posted on 26th Oct 09 at 12:32 |
not really to bothered about if they stick out or are we talkin failing MOT? | |
IvIarkgraham |
posted on 26th Oct 09 at 12:24 |
basically the et number is how far into the wheel the hub sits | |
Aleex |
posted on 26th Oct 09 at 12:21 |
ttt | |
Aleex |
posted on 26th Oct 09 at 11:43 |
Could you explain more, dont know to much on the whole alloy and tyre dimensions, what is the et? | |
IvIarkgraham |
posted on 26th Oct 09 at 11:39 |
shouldnt scrub with a decent tyres size | |
Aleex |
posted on 26th Oct 09 at 11:37 |
Right, my corsa b is lowered 40mm all round. |