k mate will take a look

Hi Scaron, found that hose you showed me and all connected up!

However, one small problem. Engine after being started for the first time is only running on 3?

Posted up another help thread in the advice section if you have any ideas?

no worries dude, ill check this thread tomoz to see how u get on, or any probs give me a u2u :thumbs:

Thanks scaron, your a life saver. Will be up bright and early tomorrow having a closer look. I will change the other black one from the fuel pressure reg to the brake servo and go from there.

Will keep you posted and thanks for the pics!

oh seems you dont have the yellow and green one, not to worry, jus make sure the other ones are in the right place, should be the same as in my diagrams.

fpr - inlet

brake servo - to the "yellow and white thing"

and the last black one from cat warmer - the other plug uner yellow and white thing lol :thumbs:

[Edited on 15-04-2009 by scaron5188]

the fuel pressure reg. goes to the inlet manifold here

from where u pictured it.



and the black one here goes to the yellow and white thing and the yellow one goes to the plug underneath in this pic



and the other black one in that pic goes to the cat warmer above the manifold

mine is a x16xe, but should be the same.

hope this helps :thumbs:

Okay, the one i have on the fuel pressure regulator needs to go on the brake servo thing highlighted in red.

But can anyone tell me what is supposed to go on the fuel pressure regulator in my first pic and what it connects to?

Im proper stumped on this one?!

The yellow and white thing, one is attached to the silver round thing right at the front of the engine near the radiator, and the other one someone has just said goes onto to the fuel regulator thing like i have it at the moment?

Which one of you is right? :boggle:

the red bit highlighted goes over to the yellow and white thing pictured in the last picture. just connect it with some vacuum pipe

Okay, will leave the fuel one on then, but what goes on that brake servo vacuum breather highlighted in red?

Anyone who knows pls help!

the top and bottom pic the pipe goes on the fuel pressuer regulate like you have it then ot goes on to the inlet manifold not sure bout the middle pic tho

Need your help,

Recently completed a head gasket job on my sport and have virtually finished except i want to be sure all the hoses are wired up correctly.

However, everything has a home apart from the two below pics.

Could somebody who knows X14XE's tell me what attaches to them and where i can find them?

I have something connected on the below pic, but im confident its not right so any advice on this would be helpful. I think its a fuel pressure or vent breather but have no idea what it connects to!:



Finally, there seems to be a breather on what i think is the break servo vacuum and dont know what goes on this:



However, these two in the below pic, only 1 i have found a home for on the silver mount thing at just above the exhaust manifold and i think the uppermost one might go on the brake vacuum breather above?



Any experts amongst us with advice would be helpful, and anyone with detailed pics of a functional engine would be great!

Cheers in advance!

[Edited on 15-04-2009 by cheater]

[Edited on 15-04-2009 by cheater]