Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.8 Conversion - Fuel regulator(ing) » Post Reply

Who Can Post?

All users can post new topics and all users can reply.

Icon:

Formatting Mode:
Normal
Advanced
Help

Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On

Post Options:

Disable smileys?
Turn BBCode off?
Receive email notification of new replies?


swill_omnibus	posted on 6th Feb 09 at 18:08
	Need a fuel regulator also, http://cgi.ebay.co.uk/ADJUSTABLE-FUEL-PRESSURE-REGULATOR-KIT-1-1-RATIO-SILVER_W0QQitemZ120374252586QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item120374252586&_trksid=p3286.c0.m14&_trkparms=72%3A1701\|66%3A2\|65%3A12\|39%3A1\|240%3A1318 Would that do the job? [Edited on 06-02-2009 by swill_omnibus]
swill_omnibus	posted on 6th Feb 09 at 08:42
	TTT
swill_omnibus	posted on 5th Feb 09 at 13:08
	TTT for dinner time Also, what about radiator, assume standard setup is sufficient? Just i got a mate whos got one of those "super duper slim" ones and he'd sell cheap 4me, any point?
swill_omnibus	posted on 4th Feb 09 at 22:21
	Any of this exact engine in astra pics?
swill_omnibus	posted on 4th Feb 09 at 22:15
	I'll start.......
swill_omnibus	posted on 4th Feb 09 at 20:45
	Lol it is near aye! :lol: Not far from there anyway, bout 10min tops
tom_simes	posted on 4th Feb 09 at 20:07
	Williamstown? That's by the town named after me - Thomastown :D :lol:
swill_omnibus	posted on 4th Feb 09 at 19:50
	One near me in the Rhondda in Williamstown. Not 1 astra or meriva to look in :( Though i did find a 70's FORD :D
tom_simes	posted on 4th Feb 09 at 19:48
	Which scrappy out of interest mate?
swill_omnibus	posted on 4th Feb 09 at 19:46
	Iv'e found some do have the XE1 but trim like LS and stuff, so not very common in vectras but that all there seems 2b in my local scrap yards lol Cheers for the info, shall have a looksie now :)
tom_simes	posted on 4th Feb 09 at 19:43
	Steve, find a post by DaveyLC (probably his project thread is easiest) and check his sig - he has a link to all the pictures :thumbs: Although, IIRC, the Vectra's all had the big block X18XE in them I think?
swill_omnibus	posted on 4th Feb 09 at 19:23
	PIC REQUEST: Could people post pics up of Vectra B and astras that have the X18XE1 engine in, JUST so i know how it should look like when i go to scrap yard tomoz to x2 confirm it!
swill_omnibus	posted on 4th Feb 09 at 16:49
	Also, what about radiator, assume standard setup is sufficient? Just i got a mate whos got one of those "super duper slim" ones and he'd sell cheap 4me, any point?
swill_omnibus	posted on 4th Feb 09 at 16:47
	Lush cheers dean as i maybe getting a bargain at my local scrap-yard for one :thumbs:
dean101287	posted on 4th Feb 09 at 15:21
	Your gearbox and shafts will be fine to use on the x18xe1
swill_omnibus	posted on 4th Feb 09 at 15:11
	What gearbox is on the 1.4 sport then the F13? And what about driveshafts, will they be ok or do they NEED to be the 1.6 driveshafts?
john_c20xe	posted on 3rd Feb 09 at 23:50
	i also would like to know this i wana use 18xe bottom end on x16
Warren G	posted on 3rd Feb 09 at 18:15
	f15 fits im using a f13 on mine
swill_omnibus	posted on 3rd Feb 09 at 17:35
	Ah soz meant the 1.4, if it has the F17, don't think it does though, it's the F15 i think?
Warren G	posted on 2nd Feb 09 at 17:59
	dont change the box
swill_omnibus	posted on 2nd Feb 09 at 15:52
	ttt
swill_omnibus	posted on 1st Feb 09 at 21:47
	Hi all, For the XE1 conversion what gearbox as standard does it have? Is it the F17 or? Also does the 2LT redtop conversion driveshafts and hubs fit this gearbox with any fiddling? And for the engine and box does it drop straight on the mounts (car being a 1.4 16V) or is there any adjusting required? [Edited on 04-02-2009 by swill_omnibus] [Edited on 06-02-2009 by swill_omnibus]