|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » x18xe1 injector » Post Reply
|
Cossie |
posted on 21st Oct 08 at 07:30 |
I found out that z18xe1 injectors are 175cc/min at 3bar | |
luke85 |
posted on 20th Oct 08 at 21:43 |
If you can get the make and part number you can use This mother of all tables and look it up :thumbs: | |
Cossie |
posted on 20th Oct 08 at 21:36 |
i can check the x16xe part number bo one else know the x16xe flow rate cc ?? | |
luke85 |
posted on 20th Oct 08 at 16:26 |
I have a table with all the Bosch injector flows but would need the Bosch part number to check them, dont suppose you know what it is for these injectors? No need to fit bigger injectors unless you have fitted a turbo or supercharger kit though, the injectors will be plenty for the NA engine if you can have it mapped properly | |
Cossie |
posted on 19th Oct 08 at 18:06 |
some one may know ,also how much are x16xe flow rate cc ? | |
Cossie |
posted on 19th Oct 08 at 07:30 |
Some one knows how much cc does and x18xe1 or z18xe (smalblock) flow rate and if can be used on x16xe ? |