|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » using water lots of it » Post Reply
|
john_c20xe |
posted on 14th Oct 08 at 09:19 |
havnt actually looked but shuld be two pipes comin out of bulkhead | |
Forbes789 |
posted on 14th Oct 08 at 08:43 |
anyone, a picture would be ideal, or a good description of which ones exactly it is | |
Forbes789 |
posted on 13th Oct 08 at 10:48 |
ok had a look and as from what i see, am i right in saying its the small black pipe that comes of the top of the water bottle, the left one | |
john_c20xe |
posted on 12th Oct 08 at 10:46 |
good idea actualy, get sum plastic pipe from bnq n make a u bend | |
sebbyg |
posted on 11th Oct 08 at 21:46 |
in the engine bay look roughly in the centre of the bulkhead, you'll see 2 water pipes, thats them | |
sebbyg |
posted on 11th Oct 08 at 21:45 |
might be better to put a u-bend to join them and bypass the matrix rather than just clamping them in the meantime, until you get the matrix replaced | |
Forbes789 |
posted on 11th Oct 08 at 18:30 |
ah now thats an amazing idea, wheres the pipe i need to clamp, in the engine bay??? | |
john_c20xe |
posted on 10th Oct 08 at 21:09 |
just clamp the pipes off that go into your heater matrix from the heater matrix! then your engine will still oparate with the cooling system but it will bypass the heater matrix | |
Forbes789 |
posted on 10th Oct 08 at 00:20 |
nope no haynes manual | |
sebbyg |
posted on 9th Oct 08 at 09:09 |
no pics im afraid, no you don't have to remove dash. do you have a haynes manual?? gives a simple guide in there how to do it. its basically removing some plastic covers from behind your stereo, then you'll see the matrix (looks like a small radiator) get in to engine bay, locate where water pipes connect to matrix pipes and remove the hose clips and pull off the hoses | |
Forbes789 |
posted on 9th Oct 08 at 09:06 |
my mates just rip everything out of his 1.4 sport, it going 2 scrap i'll get the one out of his, | |
sebbyg |
posted on 9th Oct 08 at 09:01 |
its quite easy to replace. just a few bolts holding the cover around it behind centre console, and you undo the two pipes that go through bulkhead and its pretty much it iirc. think vox ask aorund £80 for a new matrix, best bet is go to your local scrappy, got mine for a tenner. | |
Forbes789 |
posted on 8th Oct 08 at 23:32 |
what we taking about for changing/repair | |
B3KAN |
posted on 7th Oct 08 at 23:33 |
Sounds like a fooked heater matrix | |
Mark B |
posted on 7th Oct 08 at 23:21 |
yes its probs ur heator matrix when i first put my xe in my corsa i didnt put the heater matrix pipes on rite and it was leeking and runing down into the car u could try that? | |
Forbes789 |
posted on 7th Oct 08 at 23:02 |
basicly my cars been using a lot of water lately as in a leaking pipe or something, cant see anywhere where there could be a leak or that, so my first reaction was the head gasket but no gunky oil or smoking out the exhaust then i found a LOT of water in the carpet on the passenger floor well |