corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Need advice regarding Central Locking installation... » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

MillerCorsa

posted on 1st Apr 03 at 22:35

Excellent, thanks alot, will give it a go!

Miller


jm960326

posted on 1st Apr 03 at 21:51

I did sumit similar. Made small hole near the rubber bits, then I just siliconed it up around it so its water tight!


corsaandy

posted on 1st Apr 03 at 21:45

what i did was from the inside of the car take the wires throught the rubber tube until you come to the conector thing for the speakers then cut a hole in the rubber tube and then in the door just next to the connector and feed the wires through the hole and along the inside of the door to the motors i did that last nite working good nw alot easier


MillerCorsa

Icon depicting mood of post posted on 1st Apr 03 at 21:19

Basically.......

On my Corsa, where the wiring for the 2 speakers in the door panel go to the car, they run in a rubber tube, from the car door to the interior...

It consists of a plug, with connectors in it, and I can see no other way of fitting my central locking wires through it, other than taking the end off the plug, and rewiring the speakers, possibly scotch locking them.

Thats my only problem, I can sort the rest, and the motors are actually in my door panels now waiting to be wired up.

Thanks for reading!
Miller

[Edited on 01-04-2003 by MillerCorsa]