is it primeing? If not then check your wiring. All your problems could be something daft like a earth problem... Lol, if your still getting no luck, drop lee mitchell a message... Always been refered to him when asking about fitting a xe or a let....

yes the fuel pump realy is plugged in

il check the other stuff tomorrow, thanks for the help

ok no fuel and no spark.... Your fuel pump isn't working for one.... Is the fuel pump relay pluged in... Also no spark... Make sure the roter arm in the distributor is there.. Or the coil pack is plugged in, and the crank position sensor is plugged in! Also the ht coil (if dizzy type) is plugged in properly...

if the CTS was not registering because of no coolant......might be it maybe?

we cant get this to start, its cranking put no fuel and no spark, the only thing i can think of is the red wire on the 9 pin plug at the drivers footwell. where is this meant to connect to?

if you dont ahve a Air flow meter pluged in it will be a git to start..

if you dont have the Crank position sensor also known as the flywheel position sensor.. i will not start..

if the cam position sensor isnt pluged in it wont start.. (this is on other cars i have worked on)

we have fitted a c20xe to a corsa and trying to get it to start, its only turning over now, does anyone know what sensors need plugged in for it to start? we dont have any airbox, exhaust mainfold or cooling system. are any of these needed to try and start the engine? thanks