|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » c20xe engine » Post Reply
|
B3KAN |
posted on 1st Apr 08 at 23:40 |
quote: Yes it will rub if your mounts are bodged like yours :o :lol: Mine has plenty clearance and has never touched the body :thumbs: | |
Olsrey |
posted on 1st Apr 08 at 18:51 |
quote: It is very close on mine and yes mine touches, but not everyones does, guess it depends on what mounts you buy and whether or not you have a bent corsa or not :lol:. | |
craig_s |
posted on 1st Apr 08 at 17:33 |
well i know i couldn't fit the multi rib belt on mine as the alternator pulley would touch or be verry close to the body. | |
Richie B |
posted on 1st Apr 08 at 11:10 |
quote: Was just going to say that :lol: | |
tom_simes |
posted on 1st Apr 08 at 10:48 |
:lol: Ed | |
Superlite Ltd. |
posted on 1st Apr 08 at 10:33 |
poly v belts lads | |
RossyB |
posted on 1st Apr 08 at 09:52 |
quote: So do I. | |
B3KAN |
posted on 31st Mar 08 at 19:13 |
No bother mate :thumbs: Much easyer than changing pullys etc plus looks better with a thicker belt :thumbs: | |
craig986 |
posted on 31st Mar 08 at 19:10 |
ok nice 1 mate thanks alot can get that sorted now | |
B3KAN |
posted on 31st Mar 08 at 19:09 |
Yea the way i measured was to get the old (long belt) and cut it then wrap ait round the alt pully and bottom pully then mark with tip ex (or similer) to the size you need, then took it to my local factors and got a belt the same size :) | |
craig986 |
posted on 31st Mar 08 at 19:04 |
quote: so i could pick 1 up from halfords yeah | |
B3KAN |
posted on 31st Mar 08 at 19:01 |
quote: No the pump is off, all you need to do is meassure what you need and get a belt to fit :thumbs: | |
craig986 |
posted on 31st Mar 08 at 18:42 |
quote: surly the belts too big thought mate or have you left the pump on | |
B3KAN |
posted on 31st Mar 08 at 18:33 |
quote: No ypu dont :o I have a multi ribbed on my xe with no power steering :thumbs: | |
craig986 |
posted on 31st Mar 08 at 18:27 |
quote: change them to what and where do i get them. what do i need all together | |
craig_s |
posted on 31st Mar 08 at 18:23 |
yeh you have got the multi-rib type.you need to checnge the alternator pulley and the bottom pulley. | |
craig986 |
posted on 31st Mar 08 at 18:22 |
quote: bout inch and half | |
craig_s |
posted on 31st Mar 08 at 18:21 |
is it a wide belt or a thin belt? | |
craig986 |
posted on 31st Mar 08 at 18:06 |
quote: not sure mate ive got the belt that was on it. its not the engine with the double pulley though | |
craig_s |
posted on 31st Mar 08 at 18:01 |
you need to change the bottom pulley and the alternator pulley to a single v-belt type.take it you have got the multi-rib belt at the moment? | |
craig986 |
posted on 31st Mar 08 at 17:40 |
right i hope some1 can help me with this 1.. |