|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » fitting of a centre section » Post Reply
|
lil_g |
posted on 5th Jan 08 at 12:57 |
I did mine with it on the floor :look: | |
B3KAN |
posted on 4th Jan 08 at 21:52 |
Jack it up and get it on axle stands to be safe :thumbs: | |
ryan_fowler1985 |
posted on 4th Jan 08 at 19:38 |
i did mine on with small ramps under the front then axle stands under the rear beam | |
Willox |
posted on 4th Jan 08 at 19:35 |
yeh,i know how to take it off,just wondering if there was a way of doing it at home without having to stick it in somewhere to get it on a ramp to save some money | |
cfuk |
posted on 4th Jan 08 at 19:31 |
you just need to take it off the cat and backbox. Then refit the new one | |
Willox |
posted on 4th Jan 08 at 19:29 |
cool.i know of someone with a pit in their garage floor.might just ask to borrow their garage for a short while and do it there then,cheers buddy | |
cfuk |
posted on 4th Jan 08 at 19:28 |
can be done, but safer & eaier on ramps | |
Willox |
posted on 4th Jan 08 at 19:21 |
how easily done without being on a ramp? just a case of jacking up front onto stands and removing and then doing the same with the back to get to the clamp in the middle and pulling out:boggle: |